(Mechanics of Solids and Structures)
Symposium Organizers:
Sung Hoon Kang, Johns Hopkins University
shkang@jhu.edu
Howon Lee, Rutgers University
howon.lee@rutgers.edu
Yaning Li, University of New Hampshire
yaning.li@unh.edu
Jerry Qi, Georgia Institute of Technology
qih@me.gatech.edu
Symposium Technical Description
Additive manufacturing, also known as 3D printing, offers unique opportunities to explore novel properties and mechanics of materials and structures. This symposium calls abstracts from research efforts related to materials and structures with novel mechanical properties/behaviors realized using 3D printing techniques. Specific topics of interest include, but not limited to:
- Metamaterials with novel properties, such as acoustic properties, negative Poisson’s ratio, etc.
- Printed active composites that achieve its actuation through spatially controlling the allocation of active materials
- Novel 3D printing methods that provide unique behaviors/functionalities including stimuli-responsive behaviors
- Design theory or methodology for materials and structures that will be realized through 3D printing
- Mechanics of 3D printed materials, such as their constitutive behaviors, fracture behaviors
- Applications of 3D printed materials and structures
Technical Program
Monday | M1 10:00am-11:40am
| D3-1: Mechanics of 3D Printed Materials and Structures | ||
| Room 2106 | Session Chair: Sung Hoon Kang, Howon Lee, Yaning Li, Jerry Qi | Track D: Mechanics of Solids and Structures |
| 10:00 am | Keynote Presentation: Additive manufacturing; research today + the direct digital revolutions
Larry Holmes, Jr.
|
|
| 10:40 am | 3D printing of carbon fiber-epoxy composites with programmable fiber orientation
Jordan Raney, Brett Compton, Jochen Mueller, Thomas Ober, Kristina Shea, Jennifer Lewis |
|
| 11:00 am | Recyclable 3D printing of thermosets based on covalent adaptable networks
Qian Shi, H. Qi |
|
| 11:20 am | Micro 3D printing of temperature responsive hydrogel using projection micro-stereolithography
Howon Lee, Daehoon Han, Zhaocheng Lu |
|
Monday | M2 1:00pm-2:40pm
| D3-2: Mechanics of 3D Printed Materials and Structures | ||
| Room 2106 | Session Chair: Sung Hoon Kang, Howon Lee, Yaning Li, Jerry Qi | Track D: Mechanics of Solids and Structures |
| 1:00 pm |
Fabrication and mechanics of additive assemblies(Invited) Thomas Siegmund |
|
| 1:40 pm | Mechanical characterization of high-strength porous biomaterials for bone replacement implants
Damiano Pasini, David Melancon |
|
| 2:00 pm | Dynamic mechanical response of laser powder bed 3d printed 316l stainless steel
Brahmananda Pramanik |
|
| 2:20 pm | Fracture toughness of fused deposition modeled thermoplastics
Rajasekhar Tripuraneni, Siva Nadimpalli |
|
Monday | M3 3:00pm-4:40pm
| D3-3: Mechanics of 3D Printed Materials and Structures | ||
| Room 2106 | Session Chair: Sung Hoon Kang, Howon Lee, Yaning Li, Jerry Qi | Track D: Mechanics of Solids and Structures |
| 3:00 pm | Algorithm driven design of tough composite materials realized through additive manufacturing
Markus Buehler
|
|
| 3:20 pm | 3D printing of active origami with complicated folding patterns
Chao Yuan |
|
| 3:40 pm | Influence of material properties and internal geometry on wrinkled interfaces in 3D printed layered composites with hyper-viscoelastic phases
Stephan Rudykh, Viacheslav Slesarenko |
|
| 4:00 pm | 3D printed chiral composites with amplified auxetic effects due to elevated internal rotation
Yaning Li, Yunyao Jiang |
|
| 4:20 pm | Topology optimization of 3D printable self sensing structures
Ryan Seifert |
|